Here’s how to fix most HDMI ARC issues: Note: you may also need to ensure that your audio device supports the correct audio format. You sometimes may need to enable PCM as the output if you’re connecting to a Blu-ray player or gaming console. HDMI ARC is terrific when it works properly. However, often it takes a bit of elbow grease to get it functioning right when you’re setting it up initially. Usually, HDMI ARC doesn’t work because of improper settings on either the input device, the output device, or the television itself. Although, it can be a more complex problem. If you’re having HDMI ARC issues and you’re frustrated with trying to get it to work correctly, you’ve come to the right place! Read on to learn exactly how to fix your HDMI ARC woes!
How HDMI ARC and eARC Work Normally
As we explored in our guide on HDMI ARC and eARC, eARC can come alongside HDMI ARC. They both provide the ability to allow audio signals to travel in both directions along the HDMI cable at the same time. This capability will enable you to significantly reduce the total number of cables you use in your home theater setup. Additionally, it lets you fully control the volume with a single remote control.Standard HDMI cables provide both video and audio signals through a single cable. Having audio and video in one cable is convenient because it reduces the number of cables between two devices. However, standard HDMI makes it impossible to split audio from the video without extra components which can be complicated and expensive. Both HDMI ARC and eARC are helpful because the audio quality of most built-in TV speakers leaves much to be desired. ARC and eARC allow for an easy connection to soundbars, surround sound systems, or whatever external speaker system you prefer.
HDMI ARC Explained
Solving issues with splitting audio and video on HDMI is where HDMI ARC comes to save the day (more troubleshooting tips in our guide). As stated earlier, HDMI ARC lets audio transmit in both directions. It can transmit uncompressed stereo sound and compressed surround sound along just one HDMI connection. In other words, HDMI ARC can transmit stereo sound and compressed 5.1 audio on the return channel over a single cable. Setting up HDMI ARC requires some setup steps on both your television and your devices, so it can become a little complex of a process.
HDMI eARC Explained
HDMI eARC is the newer, more advanced version of HDMI ARC. It was released in 2017 along with HDMI version 2.1. The term “eARC” stands for Enhanced Audio Return Channel, which correctly asserts it as a vast improvement over HDMI ARC. HDMI eARC works the same way as HDMI ARC, albeit with a handful of improvements. Setup is mostly the same, but you will need newer (HDMI 2.1) cables to work. A tremendous advantage of eARC is that it combines HDMI and ethernet, which automatically sets up your devices to enable HDMI eARC. Automatic setup (i.e., plug & play) saves you time figuring out settings like you would with HDMI ARC. Additionally, HDMI eARC has excellent sound quality, a notable improvement over HDMI ARC. While HDMI ARC is limited to 7.1 channels of compressed audio through Dolby Digital Plus (sometimes includes Dolby Atmos height channels). HDMI eARC isn’t limited when it comes to audio quality or audio codecs. It can output the highest audio quality available such as Dolby TrueHD and DTS-HD Master Audio. However, eARC is so new that it is yet to be a widely available feature on home theater equipment. Manufacturers are getting there, and before you know it, almost all devices will be HDMI eARC compatible.
Reasons your HDMI ARC/eARC Connection Might Not Be Working
HDMI ARC works by connecting a single HDMI cable to an HDMI ARC input on your television. The cable can then connect to an audio receiver which is also connected to an input device like a Bluray player or gaming console. If your TV has an HDMI ARC output, it will be marked as such next to the HDMI connection. Once you get all of your devices connected (TV, surround sound receiver or speaker, and input device/Blu-ray player), you should be able to get started. If it doesn’t work right away, you will have to do some troubleshooting to figure out what’s wrong and fix it.
Troubleshooting and Fixing HDMI ARC Issues
Before you start troubleshooting your devices, check to see that both of your devices are ARC/eARC compatible. If both devices are not compatible, you cannot use the ARC/eARC feature. In that case, you will need to connect your TV to an audio system with an audio cable or optical cable. After you have ensured that you have everything connected properly and the ARC audio is not working, you will need to adjust some settings. Since all devices differ in their settings and menu structure, it is best to refer to the owner’s manual of the devices you are using to determine how to enable HDMI ARC. Nevertheless, you will need to enable CEC and ARC in the settings on each of the following devices:
TV/Smart TV- navigate to settings, audio, then enable ARC and CEC. Every TV is different, so the settings may be in other areas. Receiver- the ARC setting may be a button on the receive or could require you to navigate to a settings screen on the small display. Input device- this could be a Blu-ray player, gaming console (Xbox, Playstation, etc.), or other input. As with other devices, you will need to navigate to and enable ARC in the settings menu.
HDMI ARC No Audio or Some Audio
Lastly, if you are still having audio issues, like no audio or just some audio out of a few speakers, you might need to adjust another setting on your TV. Navigate to an audio setting that you can toggle between “PCM” and “bitstream,” and change it from one to the other and see if that fixes your audio issue.
Quick Troubleshooting Checks for HDMI ARC
The same troubleshooting tips that are seen below can be used for HDMI eARC. However, since HDMI eARC has “plug and play” functionality, you’ll likely not have any issues as long as both devices are eARC compatible. Here are some quick troubleshooting steps if ARC was not detected on your TV during setup:
Unplug the HDMI cables and plug them back inPower cycle all devices – turn them off, unplug from the wall, plug back in, and turn back on.Turn HDMI-CEC onChange the sound settings on your TV Change ARC/eARC setting or TV audio input mode to “Auto” or “On.”
